Cera Wax for Stucco Antico Finishes
General Features
Synthetic paste for polishing treatments over Stucco Antico finishes
CERA has been specifically formulated in order to give a high sheen to all surfaces bearing a lime Stucco finish and to protect them against water. Therefore CERA may be easily applied over ERA VENEZIANA as well as all sorts of polished Marmorino finishes, such as MARMUR FINE. CERA contains synthetic waxes with a high melting point. It's solvent-free and contains cellulosic and rheologic modifiers. CERA causes therefore no allergy. One single coat, fairly easy to apply, guarantees usually for good results.
Texture
Glossy texture.
Uses
CERA is usually applied as a protective top coat over Stucco finishes. It therefore increases the glossy degree and water resistance of the final coat. From this comes its major application inside kitchens and bathrooms.
Substrate Preparation
The surface must be perfectly dry, sound, dust free, with no humidity nor salt stains.
Application Procedure and Recommendation
CERA is usually applied with a soft cotton rag, dipped in the product which requires no water dilution. When the surface is dry, polish it with a clean rag, until it becomes completely glossy and tacking-free.
Yield
30/40m2 per liter.
Physical Properties
Specific weight: 0,9kg/dm3. Viscosity: from 1700 to 1900 cps (Brookfield standard). Dry content at 105°C: 17% ± 2%. Ph: 8-8,5.
Colour Range
White
PACKAGING AND SHELF LIFE:
0,750 lt and 2,5 lt tins. The packaged product, if stored at temperatures between +5 and 35°C, is guaranteed for 12 months.
Warning
Dispose of the empty packaging and remaining material in compliance with local laws. CERA contains no dangerous substances; in case of direct eye contact wash out immediately eye and skin with plenty of fresh water for 15 minutes. Should any kind of irritation occur, seek medical treatment. Skin must be washed out with soap and water. Ingestion: Immediately seek medical treatment.
Specification
Protective top coat for lime Stucco Antico and "Marmorino" finishes consisting of one coat of a synthetic transparent wax, type CERA manufactured by Firenzecolor, Forli. The product shall be applied with a soft cotton rag, dipped in the tin of CERA. When the surface is perfectly dry, polish it with a clean soft rag until it gets completely dry, with a uniform level of sheen and tacking free. Exclusive of scaffolding, inclusive of flooring, frames and plant protection
FirenzeColor-Marmorino© is represented by Firenze Enterprises, Inc
Firenze Enterprises, Inc 12987 SW 132 CT Miami, FL 33186 1.305.232.0233 info@firenzeenterprises.com