Firenzeprimer
Metric size: 5 Lt & 10 Lt
U.S. size: 5 Lt & 10 Lt
Grain size: N/A
Price: Please call
Use: N/A
Color Available: Light White Concentrate
Application: N/A
Description
WATERBASED ACRYLIC PIGMENTED SEALER, FOR INTERIORS AND EXTERIORS FIRENZEPRIMER is a water-based primer formulated with special acrylic unsaponifiable copolymers, which well react to direct contact with the high alkalinity rate of new plasters. FIRENZEPRIMER has a high penetration and isolation power and does not alter in any way the permeability rate of the substrate.
Available Colors
Light White Concentrate
Specifications
Firenzeprimer
WATERBASED ACRYLIC PIGMENTED SEALER, FOR INTERIORS AND EXTERIORS
General Features
FIRENZEPRIMER is a water-based primer formulated with special acrylic unsaponifiable copolymers, which well react to direct contact with the high alkalinity rate of new plasters. FIRENZEPRIMER has a high penetration and isolation power and does not alter in any way the permeability rate of the substrate.
Texture
FIRENZEPRIMER: white or pigmented, liquid. Odorless and atoxic.
Uses
New or pre-existing plasters, reinforced concrete, plasterboard, old, consistent paints, etc, i.e. prior to the application of any mineral or non mineral plaster or paint.
Substrate Preparation
The substrate must be perfectly dry, dust-free, with no humidity nor salt stains. In most cases a light brushing off would do. Non-adhering pre-existing synthetic paints must be removed with a paint remover.
Application Procedure and Recommendation
FIRENZEPRIMER pigmented primer: add up to 80-100% of clean water, depending on substrate absorption. It is always recommended to make a trial first, to make sure the sealer well penetrates inside the wall and leaves no glossy reflections. If this should be the case increase the water dilution rate. The best results are achieved when the product is applied with a brush, working from the top to the bottom. Roller or spray gun applications are possible too. Do not apply with rainy weather or with air or substrate temperature below 5° C.
Yield
FIRENZEPRIMER: between 10 and 15m2/lt, depending on substrate absorption and water dilution.
Physical Properties
Specific weight: FIRENZEPRIMER: 1,438 kg per dmc, depending on substrate absorption
Colour Range
FIRENZEPRIMER: white and custom colors.
Packaging and Shelf-Life
FIRENZEPRIMER: 15lt pails: The packaged products, if stored at temperatures between +5 and 35°C, are
guaranteed for 12 months.
Warning
Dispose of the empty packaging and remaining material in compliance with local laws. FIRENZEPRIMER is absolutely atoxic and solvent-free. It contains no harmful substances, no chrome nor heavy metals. No special requirements are therefore necessary for storage or transportation of the product.
Specification
Application of a proper priming coat, after adequate substrate preparation, type FIRENZEPRIMER water-based acrylic pigmented primer manufactured by Firenzecolor, Forli, and diluted following the manufacturer's instructions, paying attention not to leave any glossy reflections on the substrate. Brush application is recommended. Roller or spray gun are possible too, always working from the top until the very bottom.
Inclusive scaffholdings up to 4mt, of flooring, frames and plant protection.
For Your Reference
Ideal priming coat for all synthetic and mineral plasters and paints.
FirenzeColor-Marmorino© is represented by Firenze Enterprises, Inc
Firenze Enterprises, Inc 12987 SW 132 CT Miami, FL 33186 1.305.232.0233 info@firenzeenterprises.com