• Fine Grain (Grasello)
• Coarse Grain
• Carrara Fine Grain
• Carrara Coarse
• Era Veneziana
• Ebano
• Corallo
• Marblestone
• Marmorino KS
• Marmur
• Teodorico

Carrara Coarse | FirenzeColor - Marmorino©

Metric size: 24 kg

U.S. size: 5 gal

Grain size: Very Fine

Price: Please call

Use: Interior & Exterior

Application: Venetian Plaster Installation & Renovation

View Gallery

Description

Venetian plaster of the greatest grain size in the Marmorino line. Use this Venetian plaster to create aged-looks, cracked, grainy, or skip trowel. Using an INOX (stainless steel) trowel you can create a smooth velvety Venetian Plaster look depending on the pressure used. This Venetian Plaster product arrives in white-untinted form and can be manipulated with mineral colors. Marble content for Carrara coarse grain Venetian Plaster FirenzeColor-Marmorino is still 42%. To prime your Venetian plaster surface use Novaprimer and apply over a variety of surfaces; tables, doors, cabinets, etc. Attend a seminar and learn the many Venetian plaster techniques that enable you to create more than one unparalleled finish.

Specifications

Firenze Mineral Wall Coating - FirenzeColor-Marmorino©

MSDS
Material Safety Data Sheet
U.S. Department of Labor
For compliance with 29 CFR 1910.1200

This is an OSHA Non-Mandatory Form, OMB No. 1218-0072 (Computer adapted) Note: information blank spaces are not permitted. If any item is not available, or no information is available, the space should be so marked. (eg. use N/A).

Section I

Manufacturer's Name: Firenze Enterprises, Inc.
Address: 12987 SW 132 Ct Miami, FL 33186
Emergency Phone: 305-232-0233
Information Phone: 305-232-0233
Date Prepared: September 10, 1997
Signature of Preparer: Burch Stewart, PH.D.

Section II - Hazardous Ingredients/Identity Information

Hazardous Components Specific Chemical Identity (or Common Names) OSHA PEL ACGIH TLV OTHER % INGREDIENTS (Optional)

• Marble (Calcium Carbonate) N/A TWA 10 MG/CU.M N/A 42% (min)
• Lime (Calcium Oxide) N/A TWA 5 MG/CU.M. N/A N/A
• Water N/A N/A N/A Balance

Section III - Physical/Chemical Characteristics

• Boiling Point: N/A
• Specific Gravity (H2O = 1): 1.59
• Vapor Pressure (mm Hg): N/A
• Melting Point: N/A
• Vapor Density (Air = 1): N/A
• Evaporation Rate: N/A
• Solubility in Water: < 0.1 g/ml (Butyl Acetate = 1)
• Appearance & Odor: Off white paste, very slight odor

Section IV - Fire and Explosion Hazard Data

• Flash point (method used) None
• Flammability: LEL N/A UEL N/A
• Extinguishing Media: N/A
• Special Fire Fighting Procedures: N/A
• Unusual Fire & Explosion Hazards: None

Section V - Reactivity Data

• Stability: Stable
• Conditions to avoid: Skin contact
• Incompatibility/Materials to avoid: Hydrogen fluoride, inter-halogens, P205
• Hazardous Decomposition or Byproducts: None
• Hazardous Polymerization: Will not occur
• Conditions to avoid: N/A

Section VI - Health Hazard Data

Routes of Entry:

• Inhalation? Yes
• Skin? Yes
• Ingestion? Yes

Health Hazards:

• Acute:
  • Bronchial irritation
  • Skin corrosion
  • Gastric
• Chronic:
  • Lung damage
  • Skin corrosion
  • None

Carcinogenicity:

• NPT? No
• IRC Monographs? No
• OSHA Reg.? No

Signs & Symptoms of Exposure: Eye, skin, or bronchial irritation

Medical Conditions Generally Aggravated by Exposure: Skin allergies or bronchial problems

Emergency and First Aid Procedures: For ingestion, drink water. For skin/eye exposure, flush with water

Section VII - Precautions for Safe Handling and Use

Steps to be taken in case material is released of spilled: Absorb with rags and dispose of in accordance with local, state, and federal regulations.

Waste disposal method: Neutralize with dilute mineral acid and dispose of in accordance with regulations.

Precautions to be taken in handling and storing: Use safety glasses, gloves, and other protective clothing.

Other Precautions: Avoid dust, spills, and skin contact.

Section VIII - Control Measures

Respiratory Protection (Specify Type): Generally not required

Ventilation:

• Local Exhaust: Well ventilated area
• Mechanical (General): Generally not required

Precautions to be taken in handling and storing: Use safety glasses, gloves, and other protective clothing.

Protective Gloves: Yes

Eye Protection: Yes

Other Protective Clothing or Equipment: Protect arms and face

Work/Hygienic Practices: Store in cool dry area

Form adapted from OSHA 174, Sept. 1985

Section 09240

Marmorino Venetian Plaster, FirenzeColor-Marmorino©

Part 1 General

1.01 Summary

1. Section Includes: Three phase application of marmorino venetian plaster finish over other substrate materials.
2. Related Section:
   1. 03300-Cast-in-Place Concrete: Concrete substrate.
   2. _____-________: Masonry substrate.
   3. 09210-Gypsum Plaster: Gypsum plaster substrate.
   4. 09220-Portland Cement Plaster: Portland cement plaster substrate.
   5. 09250-Gypsum Board: Gypsum board substrate.
3. Alternates:
   1. Reference Section 01230-Alternates.

1.02 Definitions

1. Marmorino: Plaster product containing 100 percent natural materials and minimum 42 percent ground marble.
2. Critical Lighting Area: Areas where light can strike the surface obliquely, at a very slight angle; e.g. from openings at ends of long corridors, strong side-lighting from windows, or from down-lights near a wall.

1.03 Submittals

1. Reference Section 01330-Submittal Procedures; submit following items:
   1. Product Data. Include Material Safety Data Sheet.
   2. Color chart: Manufacturer’s standard range of base colors, minimum 25 colors.
   3. Samples: Following selection of color-minimum three 8 by 10 inch (200 by 250 mm) minimum size consisting of three phase application and illustrating each specified finish and color. Prepare samples using same tools and techniques proposed for project application.
2. Quality Assurance/Control Submittals:
   1. Qualifications: Proof of manufacturer and applicator qualifications.
   2. Manufacturer’s Application Instructions.
3. Closeout Submittals: Reference Section 01780-Closeout Submittals; submit following items:
   1. Maintenance, cleaning and care instructions.

1.04 Quality Assurance

1. Color and Appearance: Match control sample, available for viewing, in the office of the Architect.
2. Qualifications:
   1. Manufacturer Qualifications: Minimum five years experience in producing marmorino venetian plaster.
   2. Applicator Qualifications: Proof of attendance at manufacturer/distributor sponsored application seminar.
3. Field Samples:
   1. Following Pre-Application Meeting, prepare 16 sf (1 m2) sample of each selected finish texture and color.
   2. Repeat as required to match approved submittal samples, and obtain Architect’s approval prior to continuing work.
   3. Protect sample and retain to use as basis for approval of completed work.
4. Pre-Installation Meeting:
   1. Convene meeting at project site within one week of scheduled start of application with representatives of following in attendance: Owner, Architect, General Contractor, and Sub-Contractor.
   2. Review substrate conditions, approved samples and colors, requirements of related work, application instructions, storage and handling procedures, and protection measures.
   3. Keep minutes of meeting including responsibilities of various parties and deviations from specifications and application instructions. Distribute minutes to attendees within 72 hours of meeting.

1.05 Delivery, Storage and Handling

1. Reference Section 01660-Product Storage and Handling Requirements.
2. Follow manufacturer's instructions.

1.06 Project/Site Conditions

1. Environmental Requirements: Maintain surface and ambient air temperature in areas of application between 50 and 80 degrees F (10 and 27 degrees C) for 24 hours before, during, and 24 hours after application.

Part 2 Products

2.01 Manufacturer

1. Manufacturer: FirenzeColor-Marmorino©
2. Manufacturer’s Representative:

   Firenze Enterprises Inc.

   12987 SW 132 Court

   Miami, Florida 33186

   Tel:877.FIRENZE

   Fax:305.232.3191

   Email: info@firenzeenterprises.com

   Website: www.firenzeenterprises.com

3. Substitutions: None permitted.
4. Composition: White, premixed paste containing well seasoned hydrated lime putty, fine marble powder, linseed oil, rheological modifiers (which guarantee a perfect workability of the product) and reinforced acrylics.

2.02 Distributor

1. Substitutions: None permitted.

2.03 Materials

1. Marmorino Venetian Plaster: Premixed coating consisting of ground marble, lime and water.
   1. Finish Texture: Fine grain, Coarse grain, Fine and/or coarse grain as shown on the Drawings.
   2. Color: ________________ As selected by Architect from Manufacturer’s base colors
2. Protection Paste: Clear soapstone paste approved by manufacturer's representative.

2.04 Equipment

1. Trowels: Approved by marmorino venetian plaster manufacturer for application of each work phase.

Part 3 Execution

SUBSTRATE SURFACE CONDITIONS ARE CRITICAL TO SUCCESSFUL APPLICATION OF MARMORINO VENETIAN PLASTER. COORIDINATE WITH OTHER SECTIONS TO PROVIDE SUBSTRATES TRUE TO PLANE WITHIN 1/8 INCH (3 MM) IN 10 FEET (3 M) IN ANY DIRECTION AND TO WITHIN 1/16 INCH (1.6 MM) IN 10 FEET (3 M) IN CRITICAL LIGHTING AREAS. COORDINATE WITH APPROPRIATE SUBSTRATE SECTION FOR PREPARATION OF SURFACES TO ENSURE THAT HOLES AND CRACKS ARE PATCHED AND THAT JOINTS, FORM LINES, AND OTHER IMPERFECTIONS ARE SMOOTH. GYPSUM BOARD SURFACES SHOULD BE FINISHED TO MINIMUM “LEVEL 4,” AND TO “LEVEL 5” IN CRITICAL LIGHTING AREAS (SEE GYPSUM ASSOCIATION PUBLICATION GA-214). COORDINATE WITH PAITING SECTION TO APPLY TO HIGH QUALITY WATER BASED PRIMER TO ALL SUBSTRATES SCHEDULED TO RECEIVE MARMORINO VENETIAN PLASTER. FERROUS SURFACES SHOULD BE PRE-PRIMED WITH A RUST-INHIBITIVE PRIMER. PREVIOUSLY PAINTED SURFACES SHOULD BE WASHED WITH SOAP AND WATER, SANDED LIGHTLY, THEN PRIMED.

3.01 Examination

1. Examine substrates upon which marmorino venetian plaster will be applied.
1. Verify that substrate surfaces are true to plane within 1/8 inch (3 mm) in 10 feet (3 m) in any direction and to within 1/16 inch (1.6 mm) in 10 feet (3 m) in critical lighting areas.
2. Verify that substrate surfaces have been primed with water-based primer and are acceptable for application of marmorino venetian plaster.
2. Coordinate with responsible entity to perform corrective work on unsatisfactory substrates.
3. Commencement of work by applicator is acceptance of substrate.

3.02 Preparation

1. Protection: Protect adjacent finished surfaces from contact with materials of this section.
2. Surface Preparation: Clean surfaces of dust and other contaminants.

3.03 Application

1. Apply marmorino venetian plaster in three phases in accordance with manufacturer's instructions to an approximate total thickness of 60 mils (1.5 mm).
2. Apply protection paste in accordance with marmorino venetian plaster manufacturer's instructions.

3.04 Cleaning

1. Reference Section 01740-Cleaning.

3.05 Protection

1. Reference Section 01760-Protecting Installed Construction.

Available Colors

Act II Matches BM 170*	Act V Matches BM 219*
Aspen Sand Matches BM 956/957*	Bella Matches BM 135(dark)*
Black Matches BM Black	Butterfinger Matches BM
Crown Sand Matches BM 2149-60(dark)*	Dusty Sage Matches BM 438*
Eggplant Matches BM 170*	Fernood Green Matches BM 501*
French Cream Matches BM 926-927*	Jade Matches BM 2035-20/40*
Luminary Gold Matches BM 207-208*	Manhattan Matches BM 975(dark)*
Naples Matches BM 2159-50*	Pearl Harbor Matches BM Pearl Harbor*
Plum Matches BM 2072-10*	Raddichio Matches BM 2082-30(dark)*
Raspberry Matches BM 2085-40/30*	RC 5005 Matches BM 1316 (light)*
RC 5002 Matches BM 735 (light)*	RC 5004 Matches BM
Regal Matches BM 2070/20*	Roccoco Matches BM 2070/10*
Russet Matches BM 170*	Salmon Matches BM 170*
Salmon Bay Blue Matches BM 809*	Sandgold Matches BM 923 (light)*
Sandtaupe Matches BM 954*	Seafoam Matches BM 676*
Silver Sage Matches BM 493 (light)*	Sky Matches BM 834*
South Beach Matches BM 214-40*	Spice Matches BM 2160-40*
Standish White Matches BM HC 32*	Summer Melon Matches BM 2156-40*
Tangerine Matches BM 170*	Vienna Matches BM 2161-50 (light)*